Pressure Control Solenoid ‘D’ Electrical

Table of contents

P2716 MERCEDES-BENZ Possible Causes

  • Faulty Transmission Fluid Pressure Solenoid
  • Transmission Fluid Pressure Solenoid harness is open or shorted
  • Transmission Fluid Pressure Solenoid circuit poor electrical connection

How do I fix code P2716 MERCEDES-BENZ?

  Check the “Possible Causes” listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins.

Cost of diagnosing the P2716 MERCEDES-BENZ code

  The cost of diagnosing the P2716 MERCEDES-BENZ code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle’s make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour.

Possible Symptoms

  • Engine Light ON (or Service Engine Soon Warning Light)

P2716 MERCEDES-BENZ Description

  This fault code is stored in the electronic control module when a malfunction is detected with the pressure control solenoid circuit. The mechanical condition of the transmission should be inspected prior to any electrical fault finding. An actuator test can be carried out on the pressure control solenoid and a current clamp can be used to monitor the condition of the winding. Electrical tests such as winding resistance, checking for short to power or short to ground can be carried out also.

Related Codes

Leave a Reply

Your email address will not be published. Required fields are marked *