Right Rear Side Impact Sensor
Table of contents
B0088 CHEVROLET Possible Causes
- Faulty Right Rear Side Impact Sensor
- Right Rear Side Impact Sensor harness is open or shorted
- Right Rear Side Impact Sensor circuit poor electrical connection
- Faulty Sensing and Diagnostic Module (SDM)
How do I fix code B0088 CHEVROLET?
Check the “Possible Causes” listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins.
Tech Notes
- DTC B0088 02: Right Rear Side Impact Sensor Short to Ground
- DTC B0088 05: Right Rear Side Impact Sensor High Voltage/Open
- DTC B0088 39: Right Rear Side Impact Sensor Internal Malfunction
- DTC B0088 3A: Right Rear Side Impact Sensor Incorrect Component Installed
- DTC B0088 71: Right Rear Side Impact Sensor Invalid Data
Cost of diagnosing the B0088 CHEVROLET code
The cost of diagnosing the B0088 CHEVROLET code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle’s make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour.
Possible Symptoms
- Air Bag Warning Light ON
B0088 CHEVROLET Description
The impact sensors are equipped on vehicles to supplement the Supplemental Inflatable Restraint (SIR) system performance. The impact sensors are electronic and are not part of the deployment loops, but instead provide inputs to the Sensing and Diagnostic Module (SDM). The impact sensors can assist in determining the severity of some frontal and side collisions. The SDM uses the input from the impact sensors to assist in determining the severity of a collision further supporting air bag deployment. If the SDM determines a deployment is warranted, the SDM will cause current to flow through the deployment loops deploying the air bags.