Passenger Air Bag On Indicator Circuit
Table of contents
B067F CHEVROLET Possible Causes
- Faulty Passenger Air Bag Disable Indicator
- Passenger Air Bag Disable Indicator harness is open or shorted
- Passenger Air Bag Disable Indicator circuit poor electrical connection
- Faulty Inflatable Restraint Sensing and Diagnostic Module (SDM)
How do I fix code B067F CHEVROLET?
Check the “Possible Causes” listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins.
Tech Notes
- B067F 01: Passenger Air Bag On Indicator Circuit Short to Battery
- B067F 02: Passenger Air Bag On Indicator Circuit Short to Ground
- B067F 04: Passenger Air Bag On Indicator Circuit Open
Cost of diagnosing the B067F CHEVROLET code
The cost of diagnosing the B067F CHEVROLET code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle’s make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour.
Possible Symptoms
- Air Bag Warning Light ON
B067F CHEVROLET Description
The passenger air bag ON/OFF indicators are used to notify the driver when the passenger presence system has enabled or disabled the passenger instrument panel air bag. When the ignition is turned ON, the ignition voltage is supplied to the passenger presence module. When the Inflatable Restraint Sensing and Diagnostic Module (SDM) receives the appropriate serial data message from the passenger presence module the SDM will then provide voltage to the appropriate indicator.