All Wheel Drive Indicator Circuit
Table of contents
B0770 GMC Possible Causes
- Faulty Transfer Case Select Switch
- Transfer Case Select Switch harness is open or shorted
- Transfer Case Select Switch circuit poor electrical connection
- Faulty Transfer Case Shift Control Module
How do I fix code B0770 GMC?
Check the “Possible Causes” listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins.
Cost of diagnosing the B0770 GMC code
The cost of diagnosing the B0770 GMC code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle’s make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour.
Possible Symptoms
- Engine Light ON (or Service Engine Soon Warning Light)
B0770 GMC Description
The All Wheel Drive (AWD) indicator circuit consists of an indicator lamp feed circuit and an AWD indicator lamp control circuit. When the AWD mode has been selected, current is supplied to the AWD indicator lamp by the indicator lamp feed circuit, traveling through the AWD indicator lamp LED, at which time the transfer case shift control module supplies the ground through the AWD indicator lamp control circuit.