Calibration Data Not Programmed
Table of contents
B1008 GMC Possible Causes
- Remote Control Door Lock Receiver (RCDLR) Software Calibration
- Faulty Remote Control Door Lock Receiver (RCDLR)
How do I fix code B1008 GMC?
Check the “Possible Causes” listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins.
Cost of diagnosing the B1008 GMC code
The cost of diagnosing the B1008 GMC code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle’s make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour.
Possible Symptoms
- Engine Light ON (or Service Engine Soon Warning Light)
B1008 GMC Description
When replacing a Remote Control Door Lock Receiver (RCDLR), the service replacement part is shipped with no installed software. Before the new RCDLR is operational, a software calibration is required to be downloaded using the SPS terminal. Failure to download this software calibration will result in the setting of DTC B1008.