Crash Zone Sensor 1
Table of contents
B1039 INFINITI Possible Causes
- Faulty Crash Zone Sensor 1
- Crash Zone Sensor 1 harness is open or shorted
- Crash Zone Sensor 1 circuit poor electrical connection
- Faulty Airbag Diagnosis Sensor Unit (Air Bag Control Module)
How do I fix code B1039 INFINITI?
Check the “Possible Causes” listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins.
Cost of diagnosing the B1039 INFINITI code
The cost of diagnosing the B1039 INFINITI code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle’s make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour.
Possible Symptoms
- Air Bag Warning Light ON
B1039 INFINITI Description
The main G sensor generates a signal voltage when it detects deceleration beyond the specified level caused by a vehicle frontal collision. When the airbag diagnosis sensor unit defines both the signal voltage of the G sensor and the safing algorithm to be that of a collision that exceeds a specified level, the driving circuit switches on and feeds the electric ignitor of both driver and passenger airbags and pre-tensioner seat belts. The Diagnostic Trouble Code (DTC) will set the Crash Zone Sensor 1 is malfunctioning.