Solid State Driver Disabled Due To Short Circuit
Table of contents
B106E FORD Possible Causes
- Faulty Smart Junction Box (SJB)
- Smart Junction Box (SJB) harness is open or shorted
- Smart Junction Box (SJB) circuit poor electrical connection
How do I fix code B106E FORD?
Check the “Possible Causes” listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins.
Cost of diagnosing the B106E FORD code
The cost of diagnosing the B106E FORD code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle’s make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour.
Possible Symptoms
- Engine Light ON (or Service Engine Soon Warning Light)
B106E FORD Description
When a repetitive fault causing a circuit overload is detected on certain output circuits, the Smart Junction Box (SJB) disables the circuit by removing voltage, or ground, to the affected circuit. The circuit remains disabled until the fault is corrected and an on-demand self-test is run. When the on-demand self-test has been run after all faults have been corrected, any DTCs related to the fault are cleared.