Display General Electrical Failure
Table of contents
B108E FORD Possible Causes
- Faulty Front Display Interface Module (FDIM)
- Front Display Interface Module (FDIM) harness is open or shorted
- Front Display Interface Module (FDIM) circuit poor electrical connection
- Faulty Accessory Protocol Interface Module (APIM)
How do I fix code B108E FORD?
Check the “Possible Causes” listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins.
Cost of diagnosing the B108E FORD code
The cost of diagnosing the B108E FORD code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle’s make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour.
Possible Symptoms
- Engine Light ON (or Service Engine Soon Warning Light)
B108E FORD Description
The Front Display Interface Module (FDIM) is directly connected to the Accessory Protocol Interface Module (APIM). No external circuits are connected to the FDIM. The OBDII codes set in the APIM when an error is detected in the touch sensing ability of the FDIM.