Left Rear Unlock Pull Switch Signal Stuck High
Table of contents
B10C2 FORD Possible Causes
- Faulty Left Rear Unlock Pull Switch
- Left Rear Unlock Pull Switch harness is open or shorted
- Left Rear Unlock Pull Switch circuit poor electrical connection
- Faulty Remote Function Actuator (RFA) Module
How do I fix code B10C2 FORD?
Check the “Possible Causes” listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins.
Cost of diagnosing the B10C2 FORD code
The cost of diagnosing the B10C2 FORD code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle’s make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour.
Possible Symptoms
- Engine Light ON (or Service Engine Soon Warning Light)
B10C2 FORD Description
The Remote Function Actuator (RFA) Module interprets radio frequency signals from the Remote Functions Receiver (RFR) Module and Intelligent Access (IA) key transmitters. The RFA module receives input signals from various modules and other components. Based on this information, the RFA module generates an output signal to control various components such as the door locks and the liftgate. The OBDII code sets when the RFA module detects the left rear unlock sensor activated for more than 5 minutes.