Trunk Unlock Pull Switch Signal Stuck High
Table of contents
B10C5 MERCURY Possible Causes
- Faulty Trunk Unlock Pull Switch
- Trunk Unlock Pull Switch harness is open or shorted
- Trunk Unlock Pull Switch circuit poor electrical connection
- Faulty Remote Function Actuator (RFA) Module
How do I fix code B10C5 MERCURY?
Check the “Possible Causes” listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins.
Cost of diagnosing the B10C5 MERCURY code
The cost of diagnosing the B10C5 MERCURY code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle’s make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour.
Possible Symptoms
- Engine Light ON (or Service Engine Soon Warning Light)
B10C5 MERCURY Description
The Remote Function Actuator (RFA) Module interprets radio frequency signals from the Remote Functions Receiver (RFR) Module and Intelligent Access (IA) key transmitters. The RFA module receives input signals from various modules and other components. Based on this information, the RFA module generates an output signal to control various components such as the door locks and the liftgate. The OBDII code sets when the RFA module detects a short to ground from the liftgate release switch input circuit.