Blower Motor Control Circuit Low
Table of contents
B10E9 DODGE Possible Causes
- Faulty Blower Motor Power Module
- Blower Motor Power Module harness is open or shorted
- Blower Motor Power Module circuit poor electrical connection
- Faulty A/C Heater Control
How do I fix code B10E9 DODGE?
Check the “Possible Causes” listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins.
Cost of diagnosing the B10E9 DODGE code
The cost of diagnosing the B10E9 DODGE code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle’s make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour.
Possible Symptoms
- Engine Light ON (or Service Engine Soon Warning Light)
B10E9 DODGE Description
The Powertrain Control Module (PCM) factors the Blend Door position and Blower Motor speed information into the coolant temperature modeling. This information is received as a raw voltage signal from the HVAC Module over the Can Bus. The PCM detects that the Blower Motor Control circuit is below a minimum calibrated threshold.