Rear Audio Switch Circuit Short to Battery
Table of contents
B113C MERCURY Possible Causes
- Faulty Rear Audio Switch
- Rear Audio Switch harness is open or shorted
- Rear Audio Switch circuit poor electrical connection
- Faulty Rear Audio and Temperature Control (RATC) Module
How do I fix code B113C MERCURY?
Check the “Possible Causes” listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins.
Cost of diagnosing the B113C MERCURY code
The cost of diagnosing the B113C MERCURY code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle’s make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour.
Possible Symptoms
- Engine Light ON (or Service Engine Soon Warning Light)
B113C MERCURY Description
The Rear Audio and Temperature Control (RATC) Module receives voltage and ground through the circuit. The RATC module receives input from the rear auxiliary audio controls through the circuit. It then sends these signals to the audio unit over the Audio Corporate Protocol (ACP) network through circuits. The RATC module sets the OBDII code when a short to voltage is detected on the circuitry between the RATC module and the rear auxiliary audio switch.