Park Assist Sensor 11
Table of contents
B1298 CHRYSLER Possible Causes
- Faulty Park Assist Sensor 11
- Park Assist Sensor 11 harness is open or shorted
- Park Assist Sensor 11 circuit poor electrical connection
- Faulty Park Assist Module
How do I fix code B1298 CHRYSLER?
Check the “Possible Causes” listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins.
Tech Notes
- B1298-11 PTS SENSOR 11 CIRCUIT SHORT TO GROUND
- B1298-12 PTS SENSOR 11 CIRCUIT SHORT TO BATTERY
- B1298-25 PTS SENSOR 11 SIGNAL SHAPE / WAVEFORM FAILURE
- B1298-92 PTS SENSOR 11 PERFORMANCE OR INCORRECT OPERATION
Cost of diagnosing the B1298 CHRYSLER code
The cost of diagnosing the B1298 CHRYSLER code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle’s make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour.
Possible Symptoms
- Engine Light ON (or Service Engine Soon Warning Light)
B1298 CHRYSLER Description
The Park Assist Sensors (PTS) are ultrasonic transceivers that are completely controlled by the Park Assist Module. The sensors transmit and receive ultrasonic signals. Each sensor has a voltage, signal, and return the circuit to the module. The sensors communicate with the Park Assist Module using a dedicated serial bus communication circuit. The Park Assist Module monitors the PTS Sensor when the vehicle in reverse and during the self-test while the vehicle is in drive between 18 km/h (11 mph) and 40 km/h (25 mph). The Park Assist Module sets the OBDII code when the Park Assist Sensor Signal circuit is not to factory specifications.