Driver Front Airbag Short to Battery
Table of contents
B1349 GMC Possible Causes
- Faulty Driver Front Airbag
- Driver Front Airbag harness is open or shorted
- Driver Front Airbag circuit poor electrical connection
- Faulty Clockspring
How do I fix code B1349 GMC?
Check the “Possible Causes” listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins.
Cost of diagnosing the B1349 GMC code
The cost of diagnosing the B1349 GMC code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle’s make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour.
Possible Symptoms
- Air Bag Warning Light ON
B1349 GMC Description
When the ignition switch is turned to ON, the Sensing and Diagnostic Module (SDM) will perform turn-on test to diagnose critical malfunctions within SDM itself.
Upon passing these test ignition and deployment loop voltages are measured to ensure that they are within their normal voltage ranges. The SDM monitors the voltages at the driver low and the passenger low to detect shorts to ground or voltage in the deploy loops.
The SDM checks the wiring connection to the driver airbag module by letting the infinitesimal current flow through the internal circuit and verify the resistance.