Driver Belt Pretensioner Resistance Too High
Table of contents
B1362 GMC Possible Causes
- Faulty Driver Belt Pretensioner
- Driver Belt Pretensioner harness is open or shorted
- Driver Belt Pretensioner circuit poor electrical connection
How do I fix code B1362 GMC?
Check the “Possible Causes” listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins.
Cost of diagnosing the B1362 GMC code
The cost of diagnosing the B1362 GMC code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle’s make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour.
Possible Symptoms
- Air Bag Warning Light ON
B1362 GMC Description
When the ignition switch is turned to ON, the Sensing and Diagnostic Module (SDM) will perform turn-on test to diagnose critical malfunctions within SDM itself.
Upon passing these test ignition and deployment loop voltages are measured to ensure that they are within their normal voltage ranges. The SDM monitors the voltages at the driver low and the passenger low to detect shorts to ground or voltage in the deploy loops.
The SDM checks the wiring connection to the driver belt pretensioner by letting the infinitesimal current flow through the internal circuit and verify the resistance.