Driver Side Restraints Sensor 1
Table of contents
B1414 LINCOLN Possible Causes
- Faulty Driver Side Restraints Sensor 1
- Driver Side Restraints Sensor 1 harness is open or shorted
- Driver Side Restraints Sensor 1 circuit poor electrical connection
- Faulty Restraint Control Module (RCM)
How do I fix code B1414 LINCOLN?
Check the “Possible Causes” listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins.
Tech Notes
- B1414:11 Driver Side Restraints Sensor 1 Circuit Short to Ground
- B1414:93 Driver Side Restraints Sensor 1 No Operation
Cost of diagnosing the B1414 LINCOLN code
The cost of diagnosing the B1414 LINCOLN code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle’s make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour.
Possible Symptoms
- Air Bag Warning Light ON
B1414 LINCOLN Description
The Restraint Control Module (RCM) monitors the driver front door and RH C-pillar side impact sensors and circuits for the following faults: Open circuit, Short to voltage, Short to ground, Faulted driver front door side impact sensor, Faulted RH C-pillar side impact sensor. If a fault is detected, the RCM stores DTC B1414 in memory and sends a message to the Instrument Panel Cluster (IPC) to illuminate the airbag warning indicator. The RCM communicates with each impact sensor. If the RCM is unable to communicate with the sensor, a Diagnostic Trouble Code (DTC) is stored in memory. A Continuous Memory Diagnostic Trouble Code (CMDTC) no operation can be set by a short to voltage on the return circuit of the impact sensor.