Parasitic Load
Table of contents
B1527 GMC Possible Causes
- Faulty Battery
- Low Battery Charge
- Charging System
How do I fix code B1527 GMC?
Check the “Possible Causes” listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins.
Cost of diagnosing the B1527 GMC code
The cost of diagnosing the B1527 GMC code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle’s make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour.
Possible Symptoms
- Engine Light ON (or Service Engine Soon Warning Light)
B1527 GMC Description
Components most likely to cause a parasitic draw on the battery of the vehicle are switches, relays, and control modules. After the ignition is turned OFF the control modules will begin to go to sleep (shut OFF). All control modules do not go to sleep at the same time, some, like the Heating, Ventilation, and Air-Conditioning (HVAC) and body control modules, may take up to 30 min or longer after turning the ignition off before going to sleep. Others such as the ON Star and keyless entry control modules may periodically wake up then go back to sleep. These are all normal conditions. The Body Control Module (BCM) monitors the state of charge of the electrical system. If the BCM senses that the state of charge at ignition On is 30% lower than what it was when the engine was running.