Reading Lamp Control Circuit Short To Ground
Table of contents
B161E DODGE Possible Causes
- Faulty Reading Lamp
- Reading Lamp harness is open or shorted
- Reading Lamp circuit poor electrical connection
- Faulty Body Control Module (BCM)
How do I fix code B161E DODGE?
Check the “Possible Causes” listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins.
Cost of diagnosing the B161E DODGE code
The cost of diagnosing the B161E DODGE code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle’s make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour.
Possible Symptoms
- Engine Light ON (or Service Engine Soon Warning Light)
B161E DODGE Description
The Body Control Module (BCM) provides a battery voltage output to certain switched lamps through the reading lamp circuit. These lamps use a switched path to ground for illumination. The BCM sets the OBDII code when the BCM detects a short to ground on the Reading Lamps Driver circuit for more than two seconds.