Front Right Turn Control Circuit Low
Table of contents
B163F DODGE Possible Causes
- Blown Front Right Park and Turn Signal Bulb
- Faulty Front Right Turn Lamp
- Front Right Turn Lamp harness is open or shorted
- Front Right Turn Lamp circuit poor electrical connection
- Faulty Body Control Module (BCM)
How do I fix code B163F DODGE?
Check the “Possible Causes” listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins.
Cost of diagnosing the B163F DODGE code
The cost of diagnosing the B163F DODGE code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle’s make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour.
Possible Symptoms
- Engine Light ON (or Service Engine Soon Warning Light)
B163F DODGE Description
The Body Control Module (BCM) receives a communication network message from the Steering Column Control Module (SCCM) requesting turn signal lamp illumination. When this bus message is received, the BCM provides a pulsed voltage output through the front turn signal control circuit. The front turn signal control circuit connects to the dual filament Park and Turn Signal Lamp. The same ground circuit is used for both the Park and Turn Signal filaments in a dual filament lamp.