Center Stop Lamp Control Circuit
Table of contents
B16B7 RAM Possible Causes
- Faulty Center Stop Lamp
- Center Stop Lamp harness is open or shorted
- Center Stop Lamp circuit poor electrical connection
- Faulty Body Control Module (BCM)
How do I fix code B16B7 RAM?
Check the “Possible Causes” listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins.
Tech Notes
- B16B7-11 CENTER STOP LAMP CONTROL CIRCUIT SHORT TO GROUND
- B16B7-15 CENTER STOP LAMP CONTROL CIRCUIT SHORT TO BATTERY OR OPEN
Cost of diagnosing the B16B7 RAM code
The cost of diagnosing the B16B7 RAM code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle’s make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour.
Possible Symptoms
- Engine Light ON (or Service Engine Soon Warning Light)
B16B7 RAM Description
The Body Control Module (BCM) receives a hardwired brake signal from the Anti-lock Brake System (ABS) module indicating that the Brake Pedal is applied. When this signal is received, the BCM provides a voltage output through the Center High Mounted Stop Lamp (CHMSL) control circuit. For additional information on the Brake Lamp operation. When the Body Control Module (BCM) detects a low condition on the CHMSL Driver circuit and sets the Diagnostic Trouble Code (DTC).