Right Tail Lamp 1 Control Circuit
Table of contents
B16DF JEEP Possible Causes
- Faulty Right Rear Park Lamp
- Right Rear Park Lamp harness is open or shorted
- Right Rear Park Lamp circuit poor electrical connection
- Faulty Body Control Module (BCM)
How do I fix code B16DF JEEP?
Check the “Possible Causes” listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins.
Tech Notes
- B16DF-11 RIGHT TAILLAMP 1 CONTROL CIRCUIT SHORT TO GROUND
- B16DF-15 RIGHT TAILLAMP 1 CONTROL CIRCUIT SHORT TO BATTERY OR OPEN
Cost of diagnosing the B16DF JEEP code
The cost of diagnosing the B16DF JEEP code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle’s make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour.
Possible Symptoms
- Engine Light ON (or Service Engine Soon Warning Light)
B16DF JEEP Description
The Body Control Module (BCM) receives the input from the headlamp switch requesting park lamp illumination. The BCM provides a voltage output through the right rear park lamp control circuit. The control circuit connects to the Park Lamps. A ground path for the lamps is present through the harness to the body sheet metal. For additional information on the Park Lamps operation. When the Body Control Module (BCM) detects a low condition on the Right Rear Park Lamp Driver circuit sets the Diagnostic Trouble Code (DTC).