Lamp Air Bag Warning Indicator Circuit Short To Battery
Table of contents
B1870 MAZDA Possible Causes
- Blown Air Bag Warning Light bulb
- Air Bag Warning Light bulb harness is open or shorted
- Air Bag Warning Light bulb circuit poor electrical connection
- Faulty Restrain Control Module (RCM)
How do I fix code B1870 MAZDA?
Check the “Possible Causes” listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins.
Cost of diagnosing the B1870 MAZDA code
The cost of diagnosing the B1870 MAZDA code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle’s make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour.
Possible Symptoms
- Air Bag Warning Light ON
B1870 MAZDA Description
The air bag indicator is designed to illuminate for 6 (±2) seconds when the ignition switch is turned to the RUN position. This initial 6 seconds of illumination is considered normal operation and is called Prove-Out of the air bag indicator. The air bag indicator is then used to warn the driver that there is a fault in the air bag Supplemental Restraint System (SRS) .
The air bag Restrain Control Module (RCM) module monitors the air bag indicator for open and short to ground conditions. If the ECS detects an open or short to battery condition on the air bag indicator circuit, it will store a Diagnostic Trouble Code (DTC) B1870 in memory.
If the RCM detects an air bag indicator failure in addition to another SRS failure, the RCM will send a signal to the Generic Electronic Module (GEM) module to produce five sets of five tone bursts.