Driver Door Pawl Switch Stuck
Table of contents
B18D5 JEEP Possible Causes
- Faulty Driver Door Pawl Switch
- Driver Door Pawl Switch harness is open or shorted
- Driver Door Pawl Switch circuit poor electrical connection
- Faulty Driver Door Module (DDM)
How do I fix code B18D5 JEEP?
Check the “Possible Causes” listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins.
Cost of diagnosing the B18D5 JEEP code
The cost of diagnosing the B18D5 JEEP code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle’s make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour.
Possible Symptoms
- Engine Light ON (or Service Engine Soon Warning Light)
B18D5 JEEP Description
The Driver Door Module (DDM) monitors the Driver Door Pawl Switch. The DDM sets the OBDII code when the Driver Window Drop (Pawl) Switch Sense circuit is active for over 30 seconds.