Power Liftgate Front Zone Switch Circuit Low
Table of contents
B18E3 JEEP Possible Causes
- Faulty Liftgate Switch Sense
- Liftgate Switch Sense harness is open or shorted
- Liftgate Switch Sense circuit poor electrical connection
- Faulty Power Liftgate Module
How do I fix code B18E3 JEEP?
Check the “Possible Causes” listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins.
Cost of diagnosing the B18E3 JEEP code
The cost of diagnosing the B18E3 JEEP code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle’s make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour.
Possible Symptoms
- Engine Light ON (or Service Engine Soon Warning Light)
B18E3 JEEP Description
The Power Liftgate Module monitors the Power Liftgate Front Zone Switch Circuit. When the Power Liftgate Module senses a voltage of less than 2.0 volts on the Liftgate Switch Sense circuit for longer than 10 seconds, this code will set.