Outside Mirror Left Vertical Motor Or Sensor Error
Table of contents
B1911 KIA Possible Causes
- Faulty Outside Mirror Left Vertical Motor
- Outside Mirror Left Vertical Motor harness is open or shorted
- Outside Mirror Left Vertical Motor circuit poor electrical connection
- Faulty Mirror Position Sensor
- Faulty Driver Door Module (DDM)
How do I fix code B1911 KIA?
Check the “Possible Causes” listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins.
Cost of diagnosing the B1911 KIA code
The cost of diagnosing the B1911 KIA code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle’s make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour.
Possible Symptoms
- Engine Light ON (or Service Engine Soon Warning Light)
B1911 KIA Description
The L/H Mirror is controlled by pressing direction switch (UP, DOWN, LEFT, RIGHT) with IG ON after R/H Mirror is selected by Power Window Main Switch. Case 1: The Driver Door Module (DDM) sets DTC when the change value of assist mirror position is less than 0.1V for 5sec while it is not reached to the aimed position. Case 2: The DDM sets DTC when there is counter-direction output which is 0.25V and above while assist mirror is turning to one direction. Case 3: The DDM sets DTC when there is no movement signal from the positioning sensor in assist mirror.