Window Control Circuit Overcurrent – TIPM
Table of contents
B191D JEEP Possible Causes
- Faulty Power Window Switch
- Power Window Switch harness is open or shorted
- Power Window Switch circuit poor electrical connection
- Faulty Totally Integrated Power Module (TIPM)
How do I fix code B191D JEEP?
Check the “Possible Causes” listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins.
Cost of diagnosing the B191D JEEP code
The cost of diagnosing the B191D JEEP code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle’s make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour.
Possible Symptoms
- Engine Light ON (or Service Engine Soon Warning Light)
B191D JEEP Description
When the fused ignition switch output circuit to the Power Window Switch is requiring more current than normal for over 30 ms, this code will set. If all 4 window switches are held in either the down or up position it may cause this code to set also.