Power Liftgate Latch Release Overcurrent
Table of contents
B1955 RAM Possible Causes
- Binding Liftgate
- Faulty Latch Assembly
- Latch Assembly harness is open or shorted
- Latch Assembly circuit poor electrical connection
- Faulty Power Liftgate Module
How do I fix code B1955 RAM?
Check the “Possible Causes” listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins.
Cost of diagnosing the B1955 RAM code
The cost of diagnosing the B1955 RAM code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle’s make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour.
Possible Symptoms
- Engine Light ON (or Service Engine Soon Warning Light)
B1955 RAM Description
The Power Liftgate Module monitors the Power Liftgate Latch. The Power Liftgate Module sets the OBDII code when the latch cinch operation is longer than 4 seconds, and the latch motor stall current is less than 12 amps has been detected for over 500 ms with no ratchet or secondary switch transition.