Power Liftgate Latch Release Excessive Time
Table of contents
B1956 JEEP Possible Causes
- Binding Liftgate
- Faulty Latch Assembly
- Latch Assembly harness is open or shorted
- Latch Assembly circuit poor electrical connection
- Faulty Power Liftgate Module
How do I fix code B1956 JEEP?
Check the “Possible Causes” listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins.
Cost of diagnosing the B1956 JEEP code
The cost of diagnosing the B1956 JEEP code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle’s make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour.
Possible Symptoms
- Engine Light ON (or Service Engine Soon Warning Light)
B1956 JEEP Description
The latch motor should perform its operation within four seconds. When it takes longer for the release operation, a latch motor stall current of 7 amps has been detected, this code will set.