Power Liftgate Close Direction Overcurrent
Table of contents
B196A RAM Possible Causes
- Binding Liftgate
- Strut Binding
- Faulty Liftgate Latch
- Liftgate Latch harness is open or shorted
- Liftgate Latch circuit poor electrical connection
- Faulty Power Liftgate Module
How do I fix code B196A RAM?
Check the “Possible Causes” listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins.
Cost of diagnosing the B196A RAM code
The cost of diagnosing the B196A RAM code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle’s make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour.
Possible Symptoms
- Engine Light ON (or Service Engine Soon Warning Light)
B196A RAM Description
The Power Liftgate Module monitors the Power Liftgate Close Direction. The Power Liftgate Module sets the OBDII code when the drive motor stall current of over 20 amps has been detected for over 500 ms. during a power closing operation.