Power Liftgate Open Direction Ratchet Primary Switch Performance
Table of contents
B196F JEEP Possible Causes
- Binding Liftgate
- Faulty Liftgate Ajar Switch
- Liftgate Ajar Switch harness is open or shorted
- Liftgate Ajar Switch circuit poor electrical connection
- Faulty Liftgate Latch
- Faulty Power Liftgate Module
How do I fix code B196F JEEP?
Check the “Possible Causes” listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins.
Cost of diagnosing the B196F JEEP code
The cost of diagnosing the B196F JEEP code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle’s make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour.
Possible Symptoms
- Engine Light ON (or Service Engine Soon Warning Light)
B196F JEEP Description
The Primary Ratchet (Ajar) Switch must remain closed when the liftgate is fully open or between fully open and closed positions. The switch will open when the liftgate is fully closed and latched. This switch indicates when the latch is in the primary position. It is open when in primary and closed when out of the primary. The OBDII code is set when the Liftgate Ajar Switch remained open during a power open cycle.