Power Liftgate Close Direction Ratchet Secondary Switch Performance
Table of contents
B1974 JEEP Possible Causes
- Binding Power Liftgate
- Faulty Latch Secondary Position Sense
- Latch Secondary Position Sense harness is open or shorted
- Latch Secondary Position Sense circuit poor electrical connection
- Faulty Power Liftgate Latch
- Faulty Power Liftgate Module
How do I fix code B1974 JEEP?
Check the “Possible Causes” listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins.
Cost of diagnosing the B1974 JEEP code
The cost of diagnosing the B1974 JEEP code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle’s make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour.
Possible Symptoms
- Engine Light ON (or Service Engine Soon Warning Light)
B1974 JEEP Description
The Secondary Ratchet Switch must remain closed when the liftgate is fully open or between fully open and closed positions. The switch will open when the liftgate is fully closed and latched. This switch indicates when the latch is in the secondary position. It is open when in secondary or primary positions and closed when out of secondary.