Right Power Sliding Door Position Sensor 1 Circuit Performance
Table of contents
B199C JEEP Possible Causes
- Faulty Right Power Sliding Door Position Sensor 1
- Right Power Sliding Door Position Sensor 1 harness is open or shorted
- Right Power Sliding Door Position Sensor 1 circuit poor electrical connection
- Faulty Right Power Sliding Door Module
How do I fix code B199C JEEP?
Check the “Possible Causes” listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins.
Cost of diagnosing the B199C JEEP code
The cost of diagnosing the B199C JEEP code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle’s make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour.
Possible Symptoms
- Engine Light ON (or Service Engine Soon Warning Light)
B199C JEEP Description
This code will set when the Right Power Sliding Door Module does not receive the Right Power Sliding Door Sensor 1 Signal pulses.