Right Power Sliding Door Position Sensor 2 Circuit Performance
Table of contents
B19A0 JEEP Possible Causes
- Faulty Right Power Sliding Door Position Sensor 2
- Right Power Sliding Door Position Sensor 2 harness is open or shorted
- Right Power Sliding Door Position Sensor 2 circuit poor electrical connection
- Faulty Right Power Sliding Door Drive Unit Assembly
- Faulty Power Sliding Door Module
How do I fix code B19A0 JEEP?
Check the “Possible Causes” listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins.
Cost of diagnosing the B19A0 JEEP code
The cost of diagnosing the B19A0 JEEP code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle’s make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour.
Possible Symptoms
- Engine Light ON (or Service Engine Soon Warning Light)
B19A0 JEEP Description
The Power Sliding Door Module monitors the Right Power Sliding Door Position Sensor 2. This code will set when the Right Power Sliding Door does not receive the Right Power Sliding Door Sensor 2 Signal pulses.