Right Power Sliding Door Control Circuit 2 Low
Table of contents
B19B0 JEEP Possible Causes
- Faulty Right Power Sliding Door Motor
- Right Power Sliding Door Motor harness is open or shorted
- Right Power Sliding Door Motor circuit poor electrical connection
- Faulty Right Power Sliding Door module
- Faulty Power Sliding Door Module
How do I fix code B19B0 JEEP?
Check the “Possible Causes” listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins.
Cost of diagnosing the B19B0 JEEP code
The cost of diagnosing the B19B0 JEEP code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle’s make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour.
Possible Symptoms
- Engine Light ON (or Service Engine Soon Warning Light)
B19B0 JEEP Description
The Power Sliding Door Module monitors the Right Power Sliding Door Control Circuit. This code will set when the Right Power Sliding Door module senses voltage less than 0.5 volts on the Right Power Sliding Door Motor Close Driver Circuit for over 100ms.