Left Power Sliding Door Drive Clutch Control Circuit Low
Table of contents
B19B7 RAM Possible Causes
- Faulty Right Power Sliding Door module
- Faulty Power Sliding Door Module
How do I fix code B19B7 RAM?
Check the “Possible Causes” listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins.
Cost of diagnosing the B19B7 RAM code
The cost of diagnosing the B19B7 RAM code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle’s make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour.
Possible Symptoms
- Engine Light ON (or Service Engine Soon Warning Light)
B19B7 RAM Description
The Power Sliding Door Module monitors the Left Power Sliding Door Drive Clutch Control Circuit. This code will set when the Left Power Sliding Door module senses the Left Power Sliding Door Clutch Driver Circuit is less than 1.0 volt while the clutch is engaged. The drive clutch voltage can be read through the scan tool.