Left Power Sliding Door Drive Clutch Control Circuit High
Table of contents
B19B8 JEEP Possible Causes
- Faulty Right Power Sliding Door module
- Faulty Power Sliding Door Module
How do I fix code B19B8 JEEP?
Check the “Possible Causes” listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins.
Cost of diagnosing the B19B8 JEEP code
The cost of diagnosing the B19B8 JEEP code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle’s make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour.
Possible Symptoms
- Engine Light ON (or Service Engine Soon Warning Light)
B19B8 JEEP Description
The Power Sliding Door Module monitors the Left Power Sliding Door Drive Clutch Control Circuit. This code will set when the Left Power Sliding Door module senses Door Clutch Driver circuit feedback less than 1.0 volts when a command to engage has not been sent or the Clutch Driver circuit has been disconnected (open circuit) for more than 256 ms.