Right Power Sliding Door Drive Clutch Control Circuit Low
Table of contents
B19BC JEEP Possible Causes
- Faulty Power Sliding Door Track
- Power Sliding Door Track harness is open or shorted
- Power Sliding Door Track circuit poor electrical connection
- Faulty Right Power Sliding Door Unit Assembly
- Faulty Power Sliding Door Module
How do I fix code B19BC JEEP?
Check the “Possible Causes” listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins.
Cost of diagnosing the B19BC JEEP code
The cost of diagnosing the B19BC JEEP code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle’s make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour.
Possible Symptoms
- Engine Light ON (or Service Engine Soon Warning Light)
B19BC JEEP Description
The Power Sliding Door Module monitors the Right Power Sliding Door Drive Clutch Control Circuit. This code will set when the Right Power Sliding Door module senses the Right Power Sliding Door Clutch Driver Circuit is over 5 amps for more than 256ms.