Left Power Sliding Door Close Direction Pawl Switch Performance
Table of contents
B19CD RAM Possible Causes
- Power Sliding Door Module Out Of Calibration
- Faulty Left Pawl Switch Sense
- Left Pawl Switch Sense harness is open or shorted
- Left Pawl Switch Sense circuit poor electrical connection
- Faulty Left Power Sliding Door Latch
- Faulty Rear Door Module
How do I fix code B19CD RAM?
Check the “Possible Causes” listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins.
Cost of diagnosing the B19CD RAM code
The cost of diagnosing the B19CD RAM code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle’s make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour.
Possible Symptoms
- Engine Light ON (or Service Engine Soon Warning Light)
B19CD RAM Description
This code will set when the pawl switch has been detected before the door enters into secondary position during a closing operation.