Electronic Steering Column Lock Control General Electrical Failure
Table of contents
B1A7C JEEP Possible Causes
- Faulty Ignition Key-In
- Ignition Key-In harness is open or shorted
- Ignition Key-In circuit poor electrical connection
- Faulty Steering Column Lock Module (ELV)
- Faulty Radio Frequency Hub (RF-Hub)
How do I fix code B1A7C JEEP?
Check the “Possible Causes” listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins.
Cost of diagnosing the B1A7C JEEP code
The cost of diagnosing the B1A7C JEEP code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle’s make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour.
Possible Symptoms
- Engine Light ON (or Service Engine Soon Warning Light)
B1A7C JEEP Description
A Short to Ground condition is only detected when the Steering Column Lock is active. A Short to Battery condition is only detected when the Steering Column Lock is deactivated. Either of these conditions will set this code.