Left Side Satellite Acceleration Sensor 1 Internal
Table of contents
B1B72 MITSUBISHI Possible Causes
- Faulty Left Side Impact Sensor 1
- Left Side Impact Sensor 1 harness is open or shorted
- Left Side Impact Sensor 1 circuit poor electrical connection
- Faulty Occupant Restraint Controller (ORC)
How do I fix code B1B72 MITSUBISHI?
Check the “Possible Causes” listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins.
Cost of diagnosing the B1B72 MITSUBISHI code
The cost of diagnosing the B1B72 MITSUBISHI code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle’s make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour.
When is the code detected
This Diagnostic Trouble Code (DTC) sets when the Occupant Restraint Controller (ORC) receives notification of a self test failure within the impact sensor. Once set, this DTC is latched for this entire ignition cycle. The DTC will be latched on the next ignition cycle only if it sets all the items for the fault.
Possible Symptoms
- Air Bag Warning Light ON
B1B72 MITSUBISHI Description
The number 1 side impact sensors are located in the B-pillar area just past the 1st row doors The impact sensors perform their own self-test using power supplied by the Occupant Restraint Controller (ORC) then communicates this status back to the ORC with periodic updates. The impact sensor performs a self test for internal circuitry at power up during the initialization process, and continuously through the ignition cycle every 10 ms.