Occupant Classification Module Configuration Mismatch
Table of contents
B1BAA JEEP Possible Causes
- Faulty Front Control Module (FCM)
- Faulty Occupant Restraint Controller (ORC)
- Occupant Restraint Controller (ORC) harness is open or shorted
- Occupant Restraint Controller (ORC) circuit poor electrical connection
How do I fix code B1BAA JEEP?
Check the “Possible Causes” listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins.
Cost of diagnosing the B1BAA JEEP code
The cost of diagnosing the B1BAA JEEP code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle’s make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour.
Possible Symptoms
- Air Bag Warning Light ON
B1BAA JEEP Description
This Diagnostic Trouble Code (DTC) will set if the Occupant Restraint Controller (ORC) is not configured for the Occupant Classification Module (OCM) and the OCM is active on the CAN Bus. Note: Because all ORCs are originally configured for the OCM the ORC must learn the not equipped with OCM state from the Front Control Module (FCM).