Passenger Air Bag Disable Switch Circuit High
Table of contents
B1BB4 JEEP Possible Causes
- Faulty Passenger Air Bag Disable Switch
- Passenger Air Bag Disable Switch harness is open or shorted
- Passenger Air Bag Disable Switch circuit poor electrical connection
- Faulty Occupant Restraint Controller (ORC)
How do I fix code B1BB4 JEEP?
Check the “Possible Causes” listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins.
Cost of diagnosing the B1BB4 JEEP code
The cost of diagnosing the B1BB4 JEEP code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle’s make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour.
Possible Symptoms
- Air Bag Warning Light ON
B1BB4 JEEP Description
When the ignition is on, the Passenger Airbag MUX Switch Sense circuit supplies a 3 to 10 ms pulse every 100 ms across the On or Off switch resister to the Passenger Airbag MUX switch return circuit. Once the code is active, the Occupant Restraint Controller (ORC) will disable the indicator for the duration of the ignition cycle. The code will set if the ORC senses constant voltage over approximately 4.0 volts on the Passenger Airbag MUX Switch circuits.