Occupant Classification Module Current Table Unprogrammed
Table of contents
B1BBD JEEP Possible Causes
- Faulty Occupant Classification Module (OCM)
- Occupant Classification Module (OCM) harness is open or shorted
- Occupant Classification Module (OCM) circuit poor electrical connection
How do I fix code B1BBD JEEP?
Check the “Possible Causes” listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins.
Cost of diagnosing the B1BBD JEEP code
The cost of diagnosing the B1BBD JEEP code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle’s make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour.
Possible Symptoms
- Air Bag Warning Light ON
B1BBD JEEP Description
If the Configuration Table is not programmed at the supplier or when the checksum is invalid. This Diagnostic Trouble Code (DTC) will set if the module was received unprogrammed from the supplier, the vehicle line was not identified correctly or if the flash procedure was not completed successfully