Passenger Seat Weight Sensor Performance
Table of contents
B1BC8 JEEP Possible Causes
- Faulty Passenger Seat Weight Sensor
- Passenger Seat Weight Sensor harness is open or shorted
- Passenger Seat Weight Sensor circuit poor electrical connection
- Faulty Occupant Classification Module (OCM)
How do I fix code B1BC8 JEEP?
Check the “Possible Causes” listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins.
Cost of diagnosing the B1BC8 JEEP code
The cost of diagnosing the B1BC8 JEEP code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle’s make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour.
Possible Symptoms
- Air Bag Warning Light ON
B1BC8 JEEP Description
While the CAN bus ignition status is in IGN-RUN, the module checks the sensor input ranges. This code will set if the Occupant Classification Module (OCM) detects the difference between 2 sensors is less than 3 A/D (15 mV) counts for 10 consecutive minutes while at least one sensor count is changing and greater than 8 A/D (40 mV) counts.