Driver Mirror Position Sensor Power Supply Circuit Low
Table of contents
B1D09 JEEP Possible Causes
- Faulty Driver Mirror Position Sensor
- Driver Mirror Position Sensor harness is open or shorted
- Driver Mirror Position Sensor circuit poor electrical connection
- Faulty Driver Mirror
- Faulty Driver Door Module (DDM)
How do I fix code B1D09 JEEP?
Check the “Possible Causes” listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins.
Cost of diagnosing the B1D09 JEEP code
The cost of diagnosing the B1D09 JEEP code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle’s make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour.
Possible Symptoms
- Engine Light ON (or Service Engine Soon Warning Light)
B1D09 JEEP Description
When the Driver Door Module (DDM) senses voltage below 4.3 volts on the Mirror Position Sensor Supply circuit for over 30 ms., this code will set.