Driver Mirror Vertical Position Sensor Input Circuit High
Table of contents
B1D0D JEEP Possible Causes
- Faulty Driver Mirror
- Driver Mirror harness is open or shorted
- Driver Mirror circuit poor electrical connection
- Faulty Driver Door Module (DDM)
How do I fix code B1D0D JEEP?
Check the “Possible Causes” listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins.
Cost of diagnosing the B1D0D JEEP code
The cost of diagnosing the B1D0D JEEP code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle’s make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour.
Possible Symptoms
- Engine Light ON (or Service Engine Soon Warning Light)
B1D0D JEEP Description
When the Driver Door Module (DDM) senses greater than 4.8 volts on the Mirror Vertical Position Signal circuit for over 100 ms., this code will set.