Driver Mirror Horizontal Position Sensor Input Circuit Low
Table of contents
B1D0F JEEP Possible Causes
- Faulty Driver Mirror
- Driver Mirror harness is open or shorted
- Driver Mirror circuit poor electrical connection
- Faulty Driver Door Module (DDM)
How do I fix code B1D0F JEEP?
Check the “Possible Causes” listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins.
Cost of diagnosing the B1D0F JEEP code
The cost of diagnosing the B1D0F JEEP code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle’s make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour.
Possible Symptoms
- Engine Light ON (or Service Engine Soon Warning Light)
B1D0F JEEP Description
When the Driver Door Module (DDM) senses less than 0.16 volts on the Driver Mirror Horizontal Position Signal circuit for over 100ms., this code will set.