Power Seat Switch Open
Table of contents
B1D63 JEEP Possible Causes
- Faulty Power Seat Switch
- Power Seat Switch harness is open or shorted
- Power Seat Switch circuit poor electrical connection
- Faulty Memory Seat Module (MSMD)
How do I fix code B1D63 JEEP?
Check the “Possible Causes” listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins.
Cost of diagnosing the B1D63 JEEP code
The cost of diagnosing the B1D63 JEEP code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle’s make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour.
Possible Symptoms
- Engine Light ON (or Service Engine Soon Warning Light)
B1D63 JEEP Description
The driver power seat can be adjusted in eight different ways using the Power Seat Switch. The passenger power seat can be adjusted in six different ways. The power seat switch is located on the lower outboard side of the seat cushion on the seat cushion side shield on all models. The inpidual switches in the power seat switch assembly cannot be repaired. If one switch is damaged or faulty, the entire power seat switch must be replaced. The Diagnostic Trouble Code (DTC) will set when the Memory Seat Module (MSMD) detects an open driver seat switch MUX circuit.