Steering Column Tilt Switch Stuck
Table of contents
B1D9C RAM Possible Causes
- Faulty Steering Column Tilt Switch
- Steering Column Tilt Switch harness is open or shorted
- Steering Column Tilt Switch circuit poor electrical connection
- Faulty Steering Column Control Module (SCCM)
How do I fix code B1D9C RAM?
Check the “Possible Causes” listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins.
Cost of diagnosing the B1D9C RAM code
The cost of diagnosing the B1D9C RAM code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle’s make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour.
Possible Symptoms
- Engine Light ON (or Service Engine Soon Warning Light)
B1D9C RAM Description
The tilt, telescoping and electronic telescoping column has been designed to be serviced as an assembly; less wiring, switches, shrouds, steering wheel, etc. Most steering column components can be serviced without removing the steering column from the vehicle. The Memory Seat Module (MSM) input signal from the Steering Column Telescope Sensor is recognized in a specified voltage area. The input channel is an analog to digital converter input and the sensor is a hall sensor. The hall supply voltage is switched on when the motor becomes activated. The Diagnostic Trouble Code (DTC) is set if the Steering Column Control Module (SCCM) detects the Steering Column Power Tilt and Telescope Switch has been active for greater than 50 seconds.