3rd Row Seat Mode Select Switch Circuit High
Table of contents
B1E25 JEEP Possible Causes
- Faulty Power Folding Seat Select Switch
- Power Folding Seat Select Switch harness is open or shorted
- Power Folding Seat Select Switch circuit poor electrical connection
- Faulty Power Rear Folding Seat Module
How do I fix code B1E25 JEEP?
Check the “Possible Causes” listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins.
Cost of diagnosing the B1E25 JEEP code
The cost of diagnosing the B1E25 JEEP code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle’s make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour.
Possible Symptoms
- Engine Light ON (or Service Engine Soon Warning Light)
B1E25 JEEP Description
The Power Rear Folding Seat Module monitors the 3rd Row Seat Mode Select Switch Circuit. When the Power Rear Folding Seat Module senses voltage over 4.9 volts on the Folding Seat Select Switch MUX circuit for longer than 300 milliseconds, this code will set.